Installation of Spiral Wound Gaskets 　　Disclaimer: The following list is just a basic overview and should not be considered as formal advice or instructions. Please consult your Spiral Wound Gaskets manufacturer. 　　When installing the gasket on the new flange or replacing the old flange, the flange surface should be clean and free of indentations and scratches. Cross-surface scratches are a...

　　The difference between the asbestos gasket and Non-Asbestos Gaskets 　　Asbestos fibers are strong and can withstand high temperatures. These fibers are thin and long. Non-Asbestos Gaskets Factory uses graphite, polytetrafluoroethylene, and other materials as reinforcing fibers in gaskets. These fibers have properties such as heat resistance, chemical resistance, and temperature...

　　Metal Jacketed Gaskets can withstand very high surface pressure to work. The gasket is well-formed and has a very good resistance drift ability. 　　In many cases, Metal Jacketed Gaskets have been replaced by cam profile washers due to major technological advances in cam profile gaskets. 　　The frame of Metal Jacketed Gaskets is composed of soft ceramic fiber or graphite. The top of the soft...

　　What is Metal Jacketed Gaskets? 　　The structure of Metal Jacketed Gaskets is composed of soft filling material and is wrapped by a metal outer layer. Usually, this is a two-piece metal structure with a flat layer next to a soft finish and a wrap layer wrapped on both sides to form a complete shell to encapsulate the filler. 　　Why do I need to bring Metal Jacketed Gaskets? 　　High...

　　Insulation Gasket Kits can be seen everywhere, flanges are composed of dissimilar metals, such as cast iron to carbon steel, and even aluminum to stainless steel. Insulation Gasket Kits can generate dielectric interruptions to provide cathodic protection for upper and underground pipelines, where metal parts are in contact with each other in bolted flange joint assemblies. Insulation...

　　Kammprofile Gaskets, also known as serrated metal gaskets, consist of a metal core, usually stainless steel, with concentric grooves on both sides. The sealing layer is usually applied on either side. According to the service responsibilities, the material of this layer can be expanded graphite, polytetrafluoroethylene, non-asbestos gasket material, or some soft metal. It can be used without...

　　Insulation Gasket Kits can protect flange joints from static current corrosion (by preventing metal contact between flanges, studs, and gaskets). Insulation Gasket Kits include a washer for each nut, a full-length insulating sleeve for each bolt, a washer (F, E, D, O type), and a thick plated steel washer for each nut. 　　What are Insulation Gasket Kits? 　　The purpose of Insulation...

　　Graphite is commonly used in applications that require stability under high temperature and pressure fluctuations. In most cases, these will be extreme conditions for handling corrosive chemicals or high-temperature elements such as steam. 　　As a form of carbon, graphite is a soft material with a low coefficient of friction. When the surfaces are gathered together, they can slide without...

　　What applications are Kammprofile Gaskets used for? 　　As one of the leading manufacturers of industrial gaskets in China, our gaskets are widely used. Such as cylinder head gasket, valve cover gasket, exhaust gasket, door gasket, automobile gasket, refrigerator gasket, toilet gasket, flexitallic gasket, oil gasket, engine gasket, liquid gasket, pump gasket The name of the gasket we are...

　　Corrosion has long been the most destructive factor in nature, but with flange Insulation Gasket Kits, this expensive profit-plundering project can be almost eliminated. The quality of engineered insulation products is consistent and can be used to control and limit electrolytic corrosion in almost all piping systems. Insulation products are made of materials with excellent high...