The Fortinet NSE7_EFW-7.2 online practice test engine that comes with the Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) exam questions from 2Pass4sure assists you in simulating the real Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) exams. This is excellent for familiarizing yourself with the Fortinet NSE 7 - Enterprise Firewall 7.2 and learning what to anticipate on test day. You can also use the Fortinet Practice Test (Links to an external site.) engine to monitor your progress and review your answers to see where you need to improve for the Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) exam.

There are some education platforms in the market which limits the user groups of products to a certain extent. And we have the difference compared with the other NSE7_EFW-7.2 quiz materials for our NSE7_EFW-7.2 study dumps have different learning segments for different audiences. We have three different versions of our NSE7_EFW-7.2 Exam Questions on the formats: the PDF, the Software and the APP online. Though the content is the same, the varied formats indeed bring lots of conveniences to our customers.

>> NSE7_EFW-7.2 Brain Dumps <<

New NSE7_EFW-7.2 Brain Dumps | Valid NSE7_EFW-7.2 Technical Training: Fortinet NSE 7 - Enterprise Firewall 7.2

Each of the 2Pass4sure Fortinet NSE7_EFW-7.2 exam dumps formats excels in its way and carries actual Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) exam questions for optimal preparation. All of these Fortinet NSE 7 - Enterprise Firewall 7.2 (NSE7_EFW-7.2) practice question formats are easy to use and extremely convenient such that even newbies find them simple.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Implement Border Gateway Protocol (BGP) to route enterprise traffic
  • Configure hardware acceleration
Topic 2
  • Implement central management
  • Use FortiManager as a local FortiGuard server
  • Implement IPsec VPN IKE version 2
Topic 3
  • Implement auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites
  • Configure application control
Topic 4
  • Configure the intrusion prevention system (IPS) in an enterprise network
  • Implement the Fortinet Security Fabric
Topic 5
  • Implement OSPF to route enterprise traffic
  • Configure different operation modes for an HA cluster

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q11-Q16):

NEW QUESTION # 11
Refer to the exhibit, which contains a partial BGP combination.
NSE7_EFW-7.2-d7582544c13bb771ec02cc67cd72b727.jpg
You want to configure a loopback as the OGP source.
Which two parameters must you set in the BGP configuration? (Choose two)

  • A. ebgp-enforce-multihop
  • B. ibgp-enfoce-multihop
  • C. recursive-next-hop
  • D. update-source

Answer: A,D

Explanation:
To configure a loopback as the BGP source, you need to set the "ebgp-enforce-multihop" and "update-source" parameters in the BGP configuration. The "ebgp-enforce-multihop" allows EBGP connections to neighbor routers that are not directly connected, while "update-source" specifies the IP address that should be used for the BGP session1. Reference := BGP on loopback, Loopback interface, Technical Tip: Configuring EBGP Multihop Load-Balancing, Technical Tip: BGP routes are not installed in routing table with loopback as update source


NEW QUESTION # 12
Exhibit.
NSE7_EFW-7.2-72e0c8c68df8154e8a8f357c3dd335fa.jpg
Refer to the exhibit, which contains an active-active toad balancing scenario.
During the traffic flow the primary FortiGate forwards the SYN packet to the secondary FortiGate.
What is the destination MAC address or addresses when packets are forwarded from the primary FortiGate to the secondary FortiGate?

  • A. Secondary virtual MAC port1 then physical MAC port1
  • B. Secondary physical MAC port1
  • C. Secondary physical MAC port2 then virtual MAC port2
  • D. Secondary virtual MAC port1

Answer: D

Explanation:
The destination MAC address when packets are forwarded from the primary FortiGate to the secondary FortiGate is the secondary virtual MAC port1. This is because the primary FortiGate uses the virtual MAC address of the secondary FortiGate as the destination MAC address for the SYN packet. The virtual MAC address is derived from the HA group ID and the interface ID, and it is unique for each HA cluster member and interface. The virtual MAC address enables the secondary FortiGate to receive the SYN packet without ARP resolution. Reference: You can find more information about active-active load balancing and virtual MAC address in the following Fortinet Enterprise Firewall 7.2 documents:
Virtual server load balance
NP session offloading in HA active-active configuration
Technical Tip: How to enable TCP load balance in HA with active-active mode


NEW QUESTION # 13
Which two statements about ADVPN are true? (Choose two.)

  • A. The hub adds routes based on IKE negotiations.
  • B. AllFortiGate devices must be in the same autonomous system (AS).
  • C. You must disable add-route in the hub.
  • D. You must configure phase 2 quick mode selectors to 0.0.0.0 0.0.0.0.

Answer: A,D

Explanation:
C). The hub adds routes based on IKE negotiations: This is part of the ADVPN functionality where the hub learns about the networks behind the spokes and can add routes dynamically based on the IKE negotiations with the spokes.
D). You must configure phase 2 quick mode selectors to 0.0.0.0 0.0.0.0: This wildcard setting in the phase 2 selectors allows any-to-any tunnel establishment, which is necessary for the dynamic creation of spoke-to-spoke tunnels.
These configurations are outlined in Fortinet's documentation for setting up ADVPN, where the hub's role in route control and the use of wildcard selectors for phase 2 are emphasized to enable dynamic tunneling between spokes.


NEW QUESTION # 14
Exhibit.
NSE7_EFW-7.2-999be67e0bc5821ddb8527b036639a30.jpg
Refer to the exhibit, which contains the partial interface configuration of two FortiGate devices.
Which two conclusions can you draw from this con figuration? (Choose two)

  • A. By default FortiGate B is the primary virtual router
  • B. On failover new primary device uses the same MAC address as the old primary
  • C. The VRRP domain uses the physical MAC address of the primary FortiGate
  • D. 10.1.5.254 is the default gateway of the internal network

Answer: B,C

Explanation:
The configuration shows that VRRP (Virtual Router Redundancy Protocol) is enabled and both FortiGates have the vrrp-virtual-mac enable command, meaning they share the same MAC address. The primary FortiGate uses its physical MAC address as indicated by the set type physical command. The priority value determines which FortiGate is the primary virtual router, and in this case, FortiGate-A has a higher priority than FortiGate-B, so it is the primary by default. The IP address 10.1.5.254 is the virtual IP address of the VRRP group, not the default gateway of the internal network. Reference: You can find more information about VRRP configuration and troubleshooting in the following Fortinet Enterprise Firewall 7.2 documents:
VRRP
Technical Tip: FortiGate VRRP configuration and debug
Configuration Example: How to configure VRRP between a FortiGate and a Cisco router


NEW QUESTION # 15
Refer to the exhibit, which shows the output of a BGP summary.
NSE7_EFW-7.2-b0c1405185ae34f30889ef453742583f.jpg
What two conclusions can you draw from this BGP summary? (Choose two.)

  • A. External BGP (EBGP) exchanges routing information.
  • B. The router 100. 64. 3. 1 has the parameter bfd set to enable.
  • C. The BGP session with peer 10. 127. 0. 75 is established.
  • D. The neighbors displayed are linked to a local router with the neighbor-range set to a value of 4.

Answer: A,C

Explanation:
The output of the BGP (Border Gateway Protocol) summary shows details about the BGP neighbors of a router, their Autonomous System (AS) numbers, the state of the BGP session, and other metrics like messages received and sent.
From the BGP summary provided:
A).External BGP (EBGP) exchanges routing information.This conclusion can be inferred because the AS numbers for the neighbors are different from the local AS number (65117), which suggests that these are external connections.
B).The BGP session with peer 10.127.0.75 is established.This is indicated by the state/prefix received column showing a numeric value (1), which typically means that the session is established and a number of prefixes has been received.
C).The router 100.64.3.1 has the parameter bfd set to enable.This cannot be concluded directly from the summary without additional context or commands specifically showing BFD (Bidirectional Forwarding Detection) configuration.
D).The neighbors displayed are linked to a local router with the neighbor-range set to a value of 4.The neighbor-range concept does not apply here; the value 4 in the 'V' column stands for the BGP version number, which is typically 4.


NEW QUESTION # 16
......

Actually, most people do not like learning the boring knowledge. It is hard to understand if our brain rejects taking the initiative. Now, our company has researched the NSE7_EFW-7.2 practice guide, a kind of high efficient learning tool. Firstly, we have deleted all irrelevant knowledge, which decreases your learning pressure. Secondly, the displays of the NSE7_EFW-7.2 Study Materials are varied to cater to all fo your different study interest and hobbies. It is interesting to study with our NSE7_EFW-7.2 exam questions.

NSE7_EFW-7.2 Technical Training: https://www.2pass4sure.com/NSE-7-Network-Security-Architect/NSE7_EFW-7.2-actual-exam-braindumps.html

snipesocial_d4aec3bfe0cd4689bee79c9dcf85a89c.jpg