After your payment is successful, you will receive an e-mail from our system within 5-10 minutes, and then, you can use high-quality HPE7-A01 exam guide to learn immediately. Everyone knows that time is very important and hopes to learn efficiently, especially for those who have taken a lot of detours and wasted a lot of time. The sooner you download and use HPE7-A01 Training Materials the sooner you get the HPE7-A01 certificate.

HP HPE7-A01 exam is a valuable certification for IT professionals who work with Aruba wireless and wired networks in campus environments. By passing HPE7-A01 exam, candidates can demonstrate their expertise and knowledge in designing, deploying, and maintaining Aruba networks, which can lead to career advancement opportunities and higher salaries. With proper preparation and study, candidates can successfully pass the exam and earn the Aruba Certified Campus Access Professional certification.

>> Exam HPE7-A01 Syllabus <<

Valid HP HPE7-A01 Exam Cram, HPE7-A01 Latest Exam Answers

Managing time during the HP HPE7-A01 exam is a challenging task. Most candidates cannot manage their time during the HP HPE7-A01 exam, leave the questions, and fail. Time management skills can help students gain excellent marks in the HPE7-A01 Exam. HP HPE7-A01 practice exam on the software help you identify which kind of HPE7-A01 questions are more time-consuming, and they would be able to assess their efficiency in answering questions.

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q110-Q115):

NEW QUESTION # 110
A customer wants to enable wired authentication across all their CX switches One of the requirements is that the switch must be able to authenticate a single computer connected through a VoIP phone.
Which feature should be enabled to support this requirement?

  • A. Multi-Auth Mode
  • B. Multi-Domain Authentication
  • C. MAC Authentication
  • D. Device-Based Mode

Answer: B

Explanation:
Multi-Domain Authentication is the feature that should be enabled to support the requirement that the switch must be able to authenticate a single computer connected through a VoIP phone. Multi-Domain Authentication is a feature that allows an Aruba CX switch to apply different authentication methods and policies to different devices connected to the same port. For example, a VoIP phone and a computer can be connected to the same port using a single cable, but they can be authenticated separately using different credentials and assigned to different VLANs. The other options are incorrect because they either do not support multiple devices on the same port or do not provide authentication. Reference: https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7540/GUID-7D9E9F6E-5C2A-4F7E-BE6D-A2C3A6C7B9F9.html https://www.arubanetworks.com/assets/tg/TB_ArubaCX_Switching.pdf


NEW QUESTION # 111
The customer needs a network hardware refresh to replace an aging Aruba 5406R core switch pair using spanning tree configuration with Aruba CX 8360-32YC switches What is the benefit of VSX clustering with the new solution?

  • A. dual control plane provides better resiliency
  • B. dual Aruba AP LAN port connectivity for PoE redundancy
  • C. stacked data-plane
  • D. faster MSTP converge processing

Answer: A

Explanation:
VSX clustering is a feature that allows two Aruba CX switches to operate as a single logical device, providing high availability, scalability, and simplified management. VSX clustering has several benefits over spanning tree configuration, such as:
Dual control plane provides better resiliency. Unlike stacking, where switches share a single control plane, VSX switches have independent control planes that synchronize their states over an inter-switch link (ISL). This means that if one switch fails or reboots, the other switch can continue to operate without affecting traffic flows or network services.
Active-active forwarding provides better performance. Unlike spanning tree, where some links are blocked to prevent loops, VSX switches use all available links for forwarding traffic, providing load balancing and increased bandwidth utilization.
Multichassis LAG provides better redundancy. Unlike single-chassis LAG, where all member ports belong to one switch, VSX switches can form multichassis LAGs with downstream or upstream devices, where member ports are distributed across both switches. This provides link redundancy and seamless failover in case of switch or port failure.


NEW QUESTION # 112
Select the Aruba stacking technology matching each option (Options may be used more than once or not at all.)
HPE7-A01-5c8f90617ded07103c9b5278eae56c38.jpg

Answer:

Explanation:
HPE7-A01-66365813d0bf47eaa40493f48d78860b.jpg


NEW QUESTION # 113
A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP-group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access-Accept to the AP through which tunnel?

  • A. Split tunnel
  • B. PAR tunnel
  • C. GRE tunnel
  • D. IPsec tunnel

Answer: C

Explanation:
According to the Aruba Documentation Portal1, 802.1X is a standard for port-based network access control that uses a RADIUS server to authenticate and authorize wireless clients. 802.1X can be configured in different modes, such as bridge mode, tunnel mode, or split tunnel mode.
Option C: GRE tunnel
This is because option C shows how to configure an SSID in tunnel mode with the default AP-group settings on an Aruba switch. In tunnel mode, all client traffic from the access points is tunneled back to the controller and the controller would in turn put the client traffic onto the network2. The GRE protocol is used to encapsulate and decapsulate the traffic between the access points and the controller3.
Therefore, option C is correct.
1: https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-46C7-8497-F6B788AA05B2.html 2: https://community.arubanetworks.com/discussion/bridge-and-tunnel-mode 3: https://www.twingate.com/blog/ipsec-tunnel-mode


NEW QUESTION # 114
With the Aruba CX 6100 48G switch with uplinks of 1/1/47 and 1/1/48. how do you automate the process of resuming the port operational state once a loop on a client port is cleared?

  • A. Configure int 1/1/1-1/1/46 loop-protect re-enable-timer.
  • B. Configure global loop-protect disable timer.
  • C. Configure int 1/1/1-1/1/52 loop-protect disable timer.
  • D. Configure global loop-protect re-enable-timer.

Answer: A

Explanation:
Loop protection is a feature that detects and prevents loops in layer 2 networks. Loop protection can be enabled on ports, LAGs, or VLANs. When loop protection is enabled, the switch sends periodic loop protection messages on the interface and expects to receive them back. If a loop protection message is received back on the same interface, it indicates a loop and the switch takes an action to disable the interface or block traffic on it3. The loop-protect re-enable-timer command is used to configure the length of time the switch waits before re-enabling an interface that was disabled due to loop detection. The default value is 0, which means that the interface remains disabled until manually re-enabled3. To automate the process of resuming the port operational state once a loop on a client port is cleared, the loop-protect re-enable-timer command can be used with a non-zero value on the interface range that includes the client ports3. Therefore, answer C is correct.


NEW QUESTION # 115
......

Using the HP HPE7-A01 updated product of BraindumpStudy will result in cracking the HPE7-A01 real test on the first try. The reliability and accuracy of our HP HPE7-A01 practice questions make us one of the trusted brands in the market. BraindumpStudy proudly presents you with an HPE7-A01 Exam Dumps that carry actual HP HPE7-A01 questions.

Valid HPE7-A01 Exam Cram: https://www.braindumpstudy.com/HPE7-A01_braindumps.html

snipesocial_111e5b21c8209b6f1905afd3a92ba058.jpg