If you are wondering: how do Samsung ice machines work? Here is the answer:

The Samsung ice maker, like many other refrigerator ice makers, works connected to an electrical circuit that powers the refrigerator. The circuit is what powers the motor, the water inlet valve and the resistance, all of which makes the ice maker start - appliance repairs toronto.

The water inlet valve connects to the main pipe of your home. This way, the plumbing line supplies the ice maker with fresh, clean water through the valve.

The electrical circuit has a switch that briefly sends power to the water inlet valve solenoid. The solenoid, in turn, causes the valve to open and remain open for about 7 seconds. This time is enough for the ice mold of the ice maker to fill with water.

When the ice mold is filled with water, the cooling process begins. The function of the freezer or refrigerator is to freeze water, not the ice maker. The temperature of the unit determines how well and how quickly the water freezes in the mold.

There is a built-in thermostat in the ice maker that monitors the temperature level of the water inside the mold. Thus, when the temperature drops enough, the thermostat causes a switch in the electrical circuit to close.

What the closed switch does is allow current to flow through a coil located under the ice maker. This coil is a heating coil and when it gets hot enough, it causes the ice mold to heat up. This loosens the ice cubes that have already formed in the ice mold.

At this point, the ice maker motor is activated by the electrical circuit. The motor turns a gear which turns another gear. The second gear is attached to a long shaft, made of plastic, which has ejector blades.

As the gear rotates, these blades also rotate, removing the cubes from the ice mold. Due to the design of the mold, the cubes connect together so that they come out as a unit.

The front of the ice maker has plastic notches that match the ejector blades. Thus, the blades easily push the ice cubes through the notches and pour them into the ice cube tray.

How to start another cycle

At the base of the plastic shaft that the blades attach to, there is a plastic toothed cam. Now, when the ejector blades are about to discharge the cubes, this plastic cam catches the closing arm of the ice maker and lifts it up. So after the ejector blades pour out the ice cubes, the cam releases the arm.

Once it is released and has reached its lowest point, the arm activates a switch in the electrical circuit which in turn causes the valve to activate and begin another ice making cycle.

If the closing arm does not reach the lowest point, probably because the ice bucket is full, another cycle cannot be started. Emptying the bucket releases the arm so another cycle can be started.

Answering the question – how do Samsung ice makers work – helps you treat the ice maker with the utmost care.