Electric vehicles bring convenience to people's travel and attract people's love. The dexterity of electric vehicles' turning directions depends on the quality of the front fork and pressure bearing. Uncertainty in turning will cause accidents, and front forks are also prone to injury and problems. Fix it quickly. Next,Electric Bike Manufacturer will introduce how to properly repair the pressure bearing?
- Spray the rust remover on the screws to be disassembled, which is convenient for disassembly and saves time and effort without damaging the wires.
- If the front wire and brake wire may be inconvenient to disassemble, unplug the connector to avoid forcible disassembly and easy disconnection and cause trouble.
- Do not tighten the screws with force. When you encounter difficult screws, screw them "back and forth", otherwise the front fork screw pattern will be easily damaged.
- It is wrong to just change the steel ball without changing the bowl, and the wear of the bowl cannot be ignored. In some cases, the "bowl" is not changed because it saves trouble. The unevenness of the "bowl" will cause the steel ball to run hard and easily break. Tips: Prepare a slender steel bar, tap the bottom bowl from top to bottom, and tap the top bowl from bottom to top, and it will come down easily.
Through the above introduction, Electric Motorbike With Brushless Motor Manufacturers hopes that you can simply refer to the content of this article in future use.