Electric Motorcycle Factory introduces how to maintain elevator mechanical parts:

  1. Cleaning and lubrication of elevator car guide shoes. Everyone knows that the guide shoe runs on the guide rail. There is an oil cup on the guide shoe. If the elevator does not produce frictional sound during operation, it is necessary to regularly refuel the oil cup and clean the guide shoe, and the car should be cleaned.
  2. Maintenance of elevator hall doors and car doors. Elevator failures are generally on the elevator hall door and car door, so attention should be paid to the maintenance of the hall door and car door. One is to refuel at the refueling place on the upper sill of the door and keep it well lubricated so that the elevator will not make unpleasant noises during operation and when the door is opened. Pay attention to the inspection of the safety touch panel of the elevator or the touch panel switch line of the light curtain type. Because the frequency of the elevator door opening and closing is high, the switch line will be damaged. This requires maintenance personnel to check every time. The replacement must be replaced in advance so that the user should not doubt the quality of the elevator product due to the door problem.
  3. The traction machine of an elevator needs oil lubrication. There are two scales on the outer cover of the traction machine. Open the oil nozzle to see that the oil should be in the middle of the two scales. If the oil is lower than the scale below, it means that the traction machine should be refueled. If no oil is added, the elevator will run for a long time. It will not get good lubrication, which will lead to the burning of the elevator traction machine and motor. When the elevator runs for a long time, the oil should be replaced in time to keep the traction machine clean and well lubricated.

Through the above introduction, High Speed Electric Motorcycle Manufacturers hopes that you can simply refer to the content of this article in future use.